E10
Lumen Yachts · Electric · luxury
Price on request
Request a quoteFast-displacement hull (combining full and semi-displacement characteristics) by Jaap de Jonge, exterior/interior design by Mulder Design, built by JR Yachts in Drachten, Netherlands. ~2,800kg. Range 100-160km (~54-86nm) at 10-13km/h (~5.4-7kn) cruise; max speed 30-35km/h (~16-19kn). Trailerable for use across different countries/lakes. Motor/battery brand and capacity not disclosed on the manufacturer's public spec page.
Specifications
- Length
- 10 m
- Beam
- 3 m
- Top speed
- 18.9 knots
- Range
- 86 nm
What a buyer should know
Who it suits
The E10 measures ten metres, with three metres of beam and around 2,800 kg — a striking set of numbers, and the weight is the interesting one. It is what makes the published 86 nm range credible at a 5.4 to 7-knot cruise, and what allows a top speed approaching 19 knots without an enormous drivetrain. The fast-displacement hull by Jaap de Jonge, with Mulder Design styling and a JR Yachts build behind it, points squarely at the Dutch and German inland owner who wants a long, quiet, elegant day boat rather than accommodation.
The gaps, and the trailer question
The yard does not disclose the motor or battery brand, nor the pack capacity. For a boat sold substantially on its range, that is a significant omission: without kilowatt hours you cannot sanity-check the range claim, compare it against rivals, estimate charging time from a given supply, or budget for eventual pack replacement. No price is published either.
The trailerability claim also needs qualifying. At 3 m beam the E10 is wider than the 2.55 m allowed for unrestricted road transport across most of Europe, so towing it between lakes and countries means abnormal-load permits and the conditions attached to them, not simply hitching up and driving. That is manageable for a determined owner, but it is not casual trailering, and the cost and paperwork should be factored in.
Written from the builder’s published specifications and the wider market, not from testing the boat ourselves. Always confirm figures with the manufacturer before committing.